Type 21 watch chronograph specifications

Chronograph Specifications

Stainless-steel case 316 L : diameter 41.5 mm, thickness 13.7,

Water resistant 10 bars, Atm ( 100 m )

Bidirectional Rotating Bezel with anti-clockwise return pawl

''Superluminova'' Hands and dials Specification

Sapphire Upper-Glass

Dubois Dépraz 42021: Swiss made 57 jewels movement,

Frequency 28800 Bits/h : fifth of a second Precision,

Three hand-Chronographs (hour, minute, second) with Flyback fonction

« Incabloc » shock-proof

Automatic self-winding

42 hours power reserve

« Cote de Genève » like finish, including circular polished-surfacing with chamfered bridges assorted with blues screws.

Veal Leather-strap, Brown Alligator Leather, or Stainless steel bracelet, all with double-armed opening mechanism

S P E C I F I C A T I O N S

Three Chronographs totalisators (hour, minute,

second) to the 1/5éme of second

Water-resistant 100 meters (10 bars)

57 jewels Automatic chronograph movement

42021 Dubois Depraz Swiss-made

Chronometric assortment and

finish "Côte de Geneve"

Flyback function

42 hours of power reserve

316 L stainless steel case protected for allergy

diameter 41,5 mms, thickness 13,7 mms

Unidirectional rotating bezel with anti-clockwise

return pawl

Superluminova Hands and figures luminescent

Saphire Upper Glass and Hardenned Glass

case-back

Leather strap or Stainless steel bracelet with

double claps opening

W A T CH S E T T I N G

Watch setting stem

POSITION 0 : stem pushed to the end : screwing

and unscrewing of the crown.

POSITION 1 : stem unscrewed and pushed to

the end : winding up of the watch ( clockwise

movement of the stem )

POSITION 2 : stem in the middle position: setting

the date (anticlockwise movement of the stem)

POSITION 3: stem fully pulled out: setting the

time and stopping the movement.

Setting the date and time :

1/ Position 0 : unscrew the crown by turning it anticlockwise from right to left.

2/ To wind up the watch by hand with the crown in position 1, turn it clockwise for about 30 windingup

movements. Later the watch will automatically wind up thanks to the movement of the wrist.

3/ Pull the stem of time-setting to position 3 , turn it clockwise until the change of the date

and until the hands stand between 2 and 4 am.

4/ Push back the stem to position 2 and change the number and change the figure until the

right date appears in the box.

5/ Pull the stem in position 3. Turn the hands clockwise to read the hour wanted.

6/ Push back the stem in position 1 (starting position).

7/ Screw back the crown in position 0 by turning it clockwise from left to right.

We particularly draw your attention on the fact that :

A / it is not recommended to set the date between 8 pm and 1 am. However, if you decide to

change the date at 10 pm for instance, it will not change at midnight but only 24 hours later.

B/ For any time-setting anticlockwise moving the hands onto past midnight, you must move the

hands at least onto 8 pm. You will then be able to set the watch on 10 pm for instance. If this is

not done as described above, the date will not change at midnight but only 24 hours later.

Bracelet opening and adjustment

Opening: press both push-buttons at the same time.

Setting:

1/ Open the buckle of the clasp.

2/ Insert the bracelet into the clasp buckle, adjust the bracelet to your liking.

3/ Lock the adjustment by clipping the clasp in the bracelet hole.